Product code S723 Agorà S723: Spotlight with bracket (to be ordered separately) - Neutral White LED - Remote Ballast - Wide Flood optic - Class I Technical description: Spotlight designed to use LED lamps and a Wide Flood optic. Consists of a die-cast aluminium optical assembly, steel brackets (both a bracket for the spotlight and a bracket for handle/pole application) and a clear, tempered sodium-calcium safety glass cover. It is fitted with an A2 stainless steel cable gland and a 2x1mm2 section 05RN-F cable. The optical assembly can be adjusted on a horizontal plane at an angle between -50° / +90°. Agorà is fitted with a graduated scale and mechanical locking device for positioning. The Opti Beam Lens optical system comes complete with a Neutral White monochrome LED circuit. The electronic DALI ballast is remote and can be ordered separately to allow the spotlights to be connected in series. The spotlight is fitted with a protection system that in the event of a fault allows all the other products in the same circuit to operate normally. Class I, IP67 rated power supply units must be used (all the necessary information is included in the instruction sheet). Both indoor (diffuser glass covers, lamellar louvers and refractors for elliptical light) and outdoor accessories (cylindrical screens, visors and protective grilles) can be used. All external screws used are made of A2 stainless steel. Installation: Floor-installed or wall-mounted with a bracket or handle (special bracket). Colour: White (01) | Black (04) | Grey (15) | Rust Brown (F5) Weight (Kg): 2.97 Wiring: A2 stainless steel cable gland. Class I;IK06;IP66 CE;UKCA;ENEC-03;BIS;QCERT;PEP-EPD Product configuration: S723 S723: Spotlight with bracket (to be ordered separately) - Neutral White LED - Remote Ballast - Wide Flood optic - Class I Product characteristics: Total lighting output [Lm]: 3737 Total luminous flux at or above an angle of 90° [Lm]: 0 Total power [W]: 38.7 Emergency luminous flux [Lm]: / Luminous efficacy [Lm/W]: 96.6 Voltage [V]: - Life Time: 100,000h - L90 - B10 (Ta 25°C) Intervallo temperatura ambiente: from -30°C to 35°C. Number of optical assemblies: 1 Optical assembly Characteristics Type 1: Light Output Ratio (L.O.R.) [%]: 74 Number of lamps for optical assembly: 1 Lamp code: LED Socket: / ZVEI Code: LED Ballast losses [W]: 5.7 Nominal power [W]: 33 Colour temperature [K]: 4000 Nominal luminous [Lm]: 5050 CRI: 80 Lamp maximum intensity [cd]: / Wavelength [Nm]: / Beam angle [°]: 50° MacAdam Step: 3