Accessory code
X939
75 W DALI dimmable power supply for Ta 25°C - Vin 220-240Vac 50/60Hz
X939: 75 W DALI dimmable power supply for Ta 25°C - Vin 220-240Vac 50/60Hz
Technical description:
DALI constant current dimmable electronic power supply for pole-mounted Palco InOut with minimal flange.
Power supply voltage Vin=220÷240 Vac 50÷60 Hz. 
Power supply fitted with 3 outlet cables. High level of mains overvoltage, short circuit, polarity inversion and overtemperature protection.<BR>
The power supply current is regulated to allow the Palco InOut luminaires to operate in environments with a temperature Ta 25°C (life), Ta max 35°C.
Installation:
Fitted with flaps and slots for installation.<BR>
The power supply unit can only be installed inside poles designed specifically for Palco InOut luminaires with minimal flange and using the X743 code accessory, to be ordered separately.<BR>
Dimension (mm):
167x61.5x39.5
Colour:
Indeterminate (00)
Weight (Kg):
6
Wiring:
The power supply unit is fitted with 3 outlet cables; input / DALI / luminaire output.<BR>
Cable lengths: input L= 260 mm, DALI L= 180 mm, output to luminaire L= 260 mm.<BR>
For the connections use the IP connectors recommended in the accessory section of the luminaire instruction sheet.
Notes:
For information regarding the number of products that can be connected refer to the tables in the luminaire instruction sheet.<BR>1 address, 1 DALI load (2 mA) Supports information 251, 252, 253.<BR>
The power supply unit can be programmed using the programming accessory code MY92 (not included). For example, a midnight-based profile can be set (not enabled by default).
Class II;IP66
ENEC;CCC