Accessory code
PA98
Constant voltage power supply IP20 24 Vdc 13 W - Vin 220-240 V - CL II - Dimensions 158x22x19 mm - for Multi-sensor BLE
PA98: Constant voltage power supply IP20 24 Vdc 13 W - Vin 220-240 V - CL II - Dimensions 158x22x19 mm - for Multi-sensor BLE
Technical description:
"Slim" type constant voltage 24 Vdc electronic ballast with a maximum power of 13 W. It can be powered from 1 to n Quick-BLE multi-sensors and Blade R multi-sensors. For the maximum number of multi-sensors that can be connected in parallel, consult the instruction sheet.
Protected against short circuits, mains overvoltages and overloads.
For codes PA62, PA88, PB06, PB07.
Installation:
Ballast protection rating: IP20. Complete with slots at the top and bottom for installation.
When connected to the recessed multi-sensors PA88, PB06 and PB07, the driver is passed through the product installation hole. For the ceiling-mounted multi-sensor PA62, a remote position is required.
Colour:
Indeterminate (00)
Weight (Kg):
0.05
Wiring:
2 primary conductors (L/N) and 2 secondary conductors (+/- 24 V). Device can take cables with a cross-section of up to 1.5 mm2, and the cable clamp can fit cross-sections of between 3 and 8 mm.
The sensors are connected in parallel. Maximum connection distance 10 m.
Notes:
Complete with terminal covers and cable clamps at top and bottom, the device can be installed freely above a false ceiling.
Class II;IP20
EAC;IRAM;ENEC Pending