Product code
MJ57
iN30
MJ57: corner module for continuous line - Low Contrast - direct emission - LED  - warm white  integrated DALI dimmable control gear
Technical description:
direct emission modular lighting system with LED lamps. Corner module for general lighting (Low Contrast) specifically for continuous line. Minimal (frameless) version extruded aluminium profile; methacrylate opal screen set up for connection to other modules by overlapping. Installation can be recessed, surface-mounted (ceiling/wall), or pendant. The module must be completed with the accessories kit needed for the selected type of installation. DALI dimmable electronic control gear integrated in the luminaire. Warm white high efficiency LED.
Installation:
pendant: complete with suspension cables (MWG6); surface-mounted: complete with supports (MWG7); recessed: after making the preparation slot, use the special supports to install in the false ceiling (MWG8).
Colour:
White (01) | Black (04) | Aluminium (12)
Weight (Kg):
2.21
Mounting:
ceiling recessed|ceiling surface|ceiling pendant
Wiring:
the module is fitted with 5-pin terminal blocks for pass-through wiring at the ends. DALI dimmable control gear integrated in the module.
Notes:
the intermediate modules are specifically for continuous line installation. To correctly complete a continuous line with corner module, use an initial module on each side of the corner. Possibility of combined Low Contrast / High Contrast.
Class I;IP20
CE;UKCA;ENEC-03;CCC S&E;BIS;EAC;NOM;IRAM
Product configuration: MJ57
MJ57: corner module for continuous line - Low Contrast - direct emission - LED  - warm white  integrated DALI dimmable control gear
Product characteristics:
Total lighting output [Lm]: 1879
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 20.6
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 91.2
Voltage [V]: -
Life Time: 50,000h - L80 - B10 (Ta 25°C)
Number of optical assemblies: 2
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 77
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 2.2
Nominal power [W]: 8.1
Colour temperature [K]: 3000
Nominal luminous [Lm]: 1225
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 3