Accessory code
MWP3
DALI-PWM interface LED dimmer 1-4 ch 12/24/48V 120/240W
MWP3: DALI-PWM interface LED dimmer 1-4 ch 12/24/48V 120/240W
Technical description:
DALI-PWM interface for dimming, DALI-2 certified; <BR>
Can be used with 12V, 24V and 48V power supply units.<BR>
The interface has 1/2/3/4 channels and DALI addresses in DT6 or 2 channels /1 DALI address in DT8 for TW luminaires, selectable from Dip-Switch.<BR>
Consult the luminaire instruction sheet for DT6/DT8 procedures, compatible channels/addresses.<BR>

Indicative channel, voltage and power combinations:<BR>
DT6 1 CH: [120W to 12V] - [240W to 24V/48V] - max 10A to 12V/24V - max 5A to 48V<BR>
DT6 2 CH: [2x60W to 12V] - [2x120W to 24V/48V] - max 5A to 12V/24V - max 2.5A to 48V per channel<BR>
DT6 3 CH: [3x40W to 12V] - [3x80W to 24V/48V] - max 3.3A to 12V/24V - max 1.6A to 48V per channel<BR>
DT6 4 CH: [4x30W to 12V] - [4x60W to 24V/48V] - max 2.5A to 12V/24V - max 1.2A to 48V per channel<BR>
DT8 2 CH: [2x60W to 12V] - [2x120W to 24V/48V] - max 5A to 12V/24V - max 2.5A to 48V per channel<BR>

<BR>
Touch DIM function: can be connected to a push button panel to perform dimming operations.
Installation:
The interface can be positioned as a backup on a false ceiling and/or inside the relevant electrical boxes. Supplied with 2 fastening slots and screws.
Colour:
Indeterminate (00)
Weight (Kg):
0.18
Wiring:
Make the connections on the appropriate terminal blocks fitted with a clamp
Notes:
Consult the luminaire instruction sheet for compatible power supply units.<br>Minimum load permitted per channel: > 20W.<BR>
Not compatible with articles MZ14, MX36 and MWF7.
IP20
EAC;ENEC Pending