Product code
BE49
iRound
BE49: Ceiling-mounted recessed luminaire with IP66 protection rating, small body, 20W HI-Par 51 GX10 adjustable
Attention! Code no longer in production
Technical description:
Downlighter with HI-PAR51 metal halide lamps. Consists of a round optical assembly, frame, lateral component holder box and an outer casing to be ordered separately where necessary. The optical assembly and frame are made of aluminium alloy, coated with liquid acrylic paint with a high level of weather and UV ray resistance. The tempered sodium - calcium sealing glass is transparent, with customised serigraphy on the edge, 4mm thick, joined to the frame with silicone. Adjustable optic: ±15° about the vertical axis and 180° relative to the horizontal plane. Adjustable versions have a system for aiming the optic using a tool even when the lamp is on (without the risk of burns). Complete with a black-painted aluminium multi-groove ring. The lateral component holder box and top end cap are made of high performance black plastic; complete with a silicone internal seal to guarantee watertightness. The optical assembly and lateral box are connected by a stainless steel threaded connector with a cable gland rubber gasket for a watertight seal. Set up for pass-through wiring using two PG13.5 grey polyamide cable glands, suitable for cables with diameter 8.5 - 12.5mm. Ceiling-mounting system consists of special A2 stainless steel screws complete with black aluminium alloy and plastic coupling supports. The frame and the caps of the lateral component holder box come complete with A2 stainless steel captive screws. There is a single tool (No. 3 Allen key) for opening the frame, the lateral box cap and for the fixing system. The outer casing for concrete ceilings is made of black-painted ready-galvanised sheet aluminium complete with an end cap and threaded bar.
Installation:
Recessed in false ceilings 5 - 50mm thick. Hole for preparation of false ceiling ø=125mm.Installed on concrete ceilings using an outer casing, to be ordered separately.
Colour:
Grey (15)
Mounting:
ceiling surface
Wiring:
Luminaire equipped with electronic ballast 220/240V 50/60Hz
Notes:
Plastic adapter disk available for flush-mounting the frame on ceilings made of concrete exposed to view (can only be used with the product with aluminium frame, without the stainless cover). Products set up for installation of a stainless steel safety kit L=2000mm.
Class II;IK07;IP66
CE;ENEC-03
Product configuration: BE49+L262
BE49: Ceiling-mounted recessed luminaire with IP66 protection rating, small body, 20W HI-Par 51 GX10 adjustable
Product characteristics:
Total lighting output [Lm]: 837
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 23
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 36.4
Voltage [V]: 230
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 100
Number of lamps for optical assembly: 1
Lamp code: L262
Socket: GX10
ZVEI Code: HI-PAR 51-CE
Ballast losses [W]: 3
Nominal power [W]: 20
Colour temperature [K]: 3000
Nominal luminous [Lm]: 837
CRI: 90
Lamp maximum intensity [cd]: 1500
Wavelength [Nm]: /
Beam angle [°]: 38°
MacAdam Step: /