Product code
BV17
iTeka
BV17: Floodlight with pole (H=1000mm) - Warm White - ST1 street optic
Attention! Code no longer in production
Technical description:
Pole lighting system with high, visual comfort, downlight optic G4, designed for use with LED lamps and consisting of an extruded aluminium support, and an aluminium alloy fastening plate and cover. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. 4 mm thick, transparent, sodium-calcium tempered glass closure, joined to the frame with silicone. The frame is secured to the optical assembly with two AISI 304 stainless steel, captive screws and an AISI 303 stainless steel hinged pin with a 50 Shore silicone gasket between them. The device can be adjusted vertically by +45°/-60° and 337° horizontally with a mechanical locking mechanism for precision aiming. The body and frame include slots for rainwater drainage. The product consists of a die-cast aluminium alloy base fitted with a PG 11, EPDM, double cable gland for pass-through wiring. Patented Optismart optic system, complete with circuit fitted with Warm White monochrome LEDs and silver aluminium reflectors. Replaceable LEDs.  Selv control gear, connected using quick-couplings and removed using clips.  Replaceable control gear. There is no light dispersion into the upper hemisphere above this luminaire when it is in a horizontal position (in compliance with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.
Installation:
Device can be mounted on pavements (concrete, solid brick and natural stone) using the accessory installation kit (art. 5596) or on the ground (with a concrete plinth) using a fixing plate with accessory anchors (art. B518).
Colour:
Grey (15)
Weight (Kg):
5.33
Mounting:
wall arm|wall surface|ground spike
Wiring:
Luminaire with electromagnetic control gear fixed to the body by means of an aluminium plate and connected to the LED circuit with quick-couplings. Resistance to mains voltage peaks of up to 4KV (with varistor).
Notes:
Fitting complete with lamp
Class II;750°C;IK09;IP66
CE;ENEC-03;EAC;NOM
Product configuration: BV17
BV17: Floodlight with pole (H=1000mm) - Warm White - ST1 street optic
Product characteristics:
Total lighting output [Lm]: 2470
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 23.3
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 106
Voltage [V]: -
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Life Time: 100,000h - L90 - B10 (Ta 40°C)
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 100
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 3.3
Nominal power [W]: /
Colour temperature [K]: 3000
Nominal luminous [Lm]: /
CRI: 70
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 3