Product code MB29 Tilt MB29: Warm LED spotlight - 20° beam. Attention! Code no longer in production Technical description: Spotlight with clean lines designed for lay-on installation; particularly suitable for mounting on cornices, architraves and shelves. The centrally-located joint system ensures easy orientation in all directions. LED light source with passive cooling system. Extruded aluminium components body with die-cast aluminium end caps. Shaped fixing plate made of galvanised sheet steel. Die-cast aluminium optical assembly, joints and arms. PMMA emission optics - medium angle. Orientation capacity: -35°/+90° around the horizontal axis; 359° around the vertical axis. Installation: Besides the lay-on installation on horizontal surfaces, the luminaire can be installed on vertical walls and 180° upside down, ensuring optimal aiming in any situation. The fixing plate is anchored with screws and wall plugs, and the component body is then attached to it mechanically. Colour: White (01) | Grey (15) Mounting: wall surface|ceiling surface Wiring: Inclusive of 1-10V dimmable control gear incorporated into the component body; wiring to power supply on fixing plate through plug-in terminal block; configured for pass-through wiring with protective grommet. Class I;850°C;IP20 CE;ENEC-03 Product configuration: MB29 MB29: Warm LED spotlight - 20° beam. Product characteristics: Total lighting output [Lm]: 833.8 Total luminous flux at or above an angle of 90° [Lm]: 0 Total power [W]: 25.5 Emergency luminous flux [Lm]: / Luminous efficacy [Lm/W]: 32.7 Voltage [V]: - Life Time: 50,000h - L80 - B20 (Ta 25°C) Number of optical assemblies: 1 Optical assembly Characteristics Type 1: Light Output Ratio (L.O.R.) [%]: 73 Number of lamps for optical assembly: 1 Lamp code: LED Socket: / ZVEI Code: LED Ballast losses [W]: 8.5 Nominal power [W]: 17 Colour temperature [K]: 3000 Nominal luminous [Lm]: 1148 CRI: 85 Lamp maximum intensity [cd]: / Wavelength [Nm]: / Beam angle [°]: 20° MacAdam Step: /