Product code
S711
Agorà
S711: Spotlight with bracket (to be ordered separately) - Warm White LED -  Remote Ballast - Spot optic - Class I
Technical description:
Spotlight designed to use LED lamps and a Spot optic. Consists of a die-cast aluminium optical assembly, steel brackets (both a bracket for the spotlight and a bracket for handle/pole application) and a clear, tempered sodium-calcium safety glass cover. It is fitted with an A2 stainless steel cable gland and a 2x1mm2 section 05RN-F cable. The optical assembly can be adjusted on a horizontal plane at an angle between -50° / +90°. Agorà is fitted with a graduated scale and mechanical locking device for positioning. The Opti Beam Lens optical system comes complete with a Warm White monochrome LED circuit. The electronic DALI ballast is remote and can be ordered separately to allow the spotlights to be connected in series. The spotlight is fitted with a protection system that in the event of a fault allows all the other products in the same circuit to operate normally. Class I, IP67 rated power supply units must be used (all the necessary information is included in the instruction sheet). Both indoor (diffuser glass covers, lamellar louvers and refractors for elliptical light) and outdoor accessories (cylindrical screens, visors and protective grilles) can be used. All external screws used are made of A2 stainless steel.
Installation:
Floor-installed or wall-mounted with a bracket or handle (special bracket).
Colour:
White (01) | Black (04) | Grey (15) | Rust Brown (F5)
Weight (Kg):
2.97
Wiring:
A2 stainless steel cable gland.
Class I;IK06;IP66
CE;UKCA;ENEC-03;BIS;QCERT;PEP-EPD
Product configuration: S711
S711: Spotlight with bracket (to be ordered separately) - Warm White LED -  Remote Ballast - Spot optic - Class I
Product characteristics:
Total lighting output [Lm]: 3542
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 38.7
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 91.5
Voltage [V]: -
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Intervallo temperatura ambiente: from -30°C to 35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 77
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 5.7
Nominal power [W]: 33
Colour temperature [K]: 2700
Nominal luminous [Lm]: 4600
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 16°
MacAdam Step: 3