Product code
BD32
iPro
BD32: Superspot floodlight  20W HIT (CDM-Tm) SS
Attention! Code no longer in production
Technical description:
Floodlight designed to use 20W CDM-Tm (PGJ5) metal halide discharge lamps with Superspot (SS) optic. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy coated with liquid acrylic paint (colour: RAL 9007 grey) or textured liquid paint (colour: RAL 9016 white) with a high level of resistance to atmospheric agents and UV rays. The 5 mm thick transparent, tempered sodium – calcium safety glass is joined to the frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a galvanised steel safety cable. The optical assembly contains the reflector made of 99.93% super-pure aluminium subjected to anodic oxidation and polishing. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. The luminaire is set up for pass-through wiring using two PG11 nickel–plated brass cable clamps, suitable for the entry of cables with diameter between 6.5 and 11 mm. The connection between the mains and the control gear is made using a 3-pole terminal board with quick-coupling system. iPro can be angled relative to the horizontal plane (+95°/ -5°) using an extruded aluminium bracket on which the graduated scale (15° steps) is marked with serigraphy. The internal silicone seals guarantee watertightness IP66. A number of accessories are available: spill-rings, lamellar louvre, visor, directional flaps, cylindrical screen, glass refractors, diffusers and coloured filters which can be applied in pairs. All external screws used are made of A2 stainless steel.
Installation:
Wall-, ceiling- and ground-mounted using bracket and fisher (not included). Can be ground-mounted with stake accessory. Can be mounted on branches with belt accessory. Dimensions:
Colour:
White (01) | Grey (15)
Mounting:
wall surface|ground spike|ceiling surface|free standing
Wiring:
Luminaire with electronic control gear.
Notes:
IK 09 with protective grille accessory
Class II;960°C;IK07;IP66
CE;ENEC-03;Retilap
Product configuration: BD32+L160
BD32: Superspot floodlight  20W HIT (CDM-Tm) SS
Product characteristics:
Total lighting output [Lm]: 1075
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 24
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 44.8
Voltage [V]: 230
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 65
Number of lamps for optical assembly: 1
Lamp code: L160
Socket: PGJ5
ZVEI Code: HIT-CE
Ballast losses [W]: 4
Nominal power [W]: 20
Colour temperature [K]: 3000
Nominal luminous [Lm]: 1650
CRI: 86
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 6°
MacAdam Step: /